Komatsu — Running the Machine During Maintenance

SAFETY Running the Machine During Maintenance If during maintenance you must run the engine, have someone remain in the operator’s seat while the engine is running. One worker must be ready to stop the engine at all times. Instruct the person sitting in the cab not to operate any controls unless instructed to do so. For machines equipped with ECSS (Electronically Controlled Suspension System), be sure the system is OFF before proceeding with any maintenance procedures. Be sure all work equipment is LOCKED . Set safety lock lever (1) to the LOCK position (L) to prevent the work equipment from moving. Set parking brake switch (2) to the ON position and apply the parking brake.

Set safety bar (4) to LOCK position (L) to prevent the machine from articulating. Be aware of rotating parts while the engine is running. Never drop or insert tools or other objects into the fan, fan belt, or other rotating parts. There is danger that these objects may contact the rotating parts and break, or be sent flying. 1-34 WA500-3LK