Komatsu — Critical Parts

SAFETY Inflating Tires Always remember that tires can burst while being inflated, causing serious accidents. Before servicing the tires, observe the following precautions. Before inflating tires, always check the wheel rims, tire walls, and tread for cuts, broken cords, or other damage. Have a tire expert perform checks and tire maintenance. When inflating tires, use a protective cage and a compressed air gun with extension hose and pressure gauge. Make sure that there is nobody in the vicinity before starting to inflate a tire. Stand at the tread side of the tire to inflate it. Accumulator This machine is equipped with an accumulator charged with high- pressure nitrogen gas.

When handling the accumulator, a careless procedure may cause an explosion which could lead to serious personal injury or death. Always observe the following precautions. Do not dissemble the accumulator. Do not expose the accumulator to high heat or an open flame. Do not weld on the accumulator. Do not drill or cut the accumulator. Do not strike or crush the accumulator. When replacing or disposing of the accumulator, always release the nitrogen pressure from the chamber. Critical Parts Periodically some parts must be replaced due to safety purposes.

Even if these parts seem to be in good condition and operating properly, they may fail at some point, possibly causing injury to the operator or pedestrian. Some of the following systems contain components that may fail under extended use: Seat belts Fuel supply and delivery hoses Hydraulic system: main delivery hoses and tubing Hydraulic hoses: all the hoses that feed and return the hydraulic fluid to and from the work equipment For additional information, see “PERIODIC REPLACEMENT OF SAFETY-CRITICAL PARTS” on page 3-16. 1-40 WA500-3LK