Bobcat Company G-SERIES — Bobcat Company G-SERIES User Manual

BOB-TACH (Cont'd) Ref No Part Number Description Remarks Serial Number Qty Page 39 - OSS# 2071349 - All rights reserved by Bobcat Company - 12/01/2009 - 20:50:59 - Produced by Ken Cook Co. with media1off 28 Model 773 G 6900939 1 BOB-TACH See Illustration DECALS/ B17183 Also Order 6561383 decal - NAP - Ref. 2-31 - Order 7143508 Bob-Tach & (2) each of 6734661 pin, 17C1080 bolt, Ref. 34 & 35 - Was 6717284 [A] 1 1 7143508 BOB-TACH Ref. 2-17, 19-21, 32 & 33 - Was 6732537 [A] 1 1 KIT See Illustration POWER BOB-TACH KIT/ TS2033 POWER BOB-TACH 1 2 17C660 BOLT 2 3 FRAME NAP 1 4 10H35 GREASE ZERK 2 5 6730997 BUSHING Press Fit - Was 711273B [A] 2 6 BUSHING NAP - 1.48"(37,6 mm) I.D. - weld on - W/Ref.

5 - Order Ref. 27 - 29 - Was 6717190 [A] 5176 13470 & Bel 2 6 5180 11111 & Bel 2 6 5190 11218 & Bel 2 7 10H25 FITTING, GREASE 5 2 8 6728473 BOLT shoulder - Was 38C001036B [A] 2 9 6702904 LEVER RH 1 9 6702903 LEVER LH 1 10 6713040 SPRING 2 11 619021 WASHER, 5 2 12 85D6 LOCK NUT 2 13 6731119 PIVOT, WEDGE Was 6704240 [B,D] 2 14 6578253 SPRING, COMPRESSION Was 6562018 [A] 2 15 6704248 PIVOT wedge 2 16 14J5032 PIN, STRAIGHT 2 17 6737191 WEDGE Was 6704242 [A] 2 18 PLUG NAP - urethane - Order Ref. 22 - Was 6717361 [A] 2 19 6717259 BUSHING weld on 2 20 6717260 BUSHING weld on 2 21 6702958 BUSHING, WELD-ON 2 22 6725318 KIT plug - Ref. 7 & 23-26 - Use W/Ref. 6 1 23 6719510 PLUG 1.48"(37,6 mm) O.D.

x 1.71"(43,4 mm) long 2 24 25K40108 O RING 10 2 25 7JM38 SNAP RING Was 7JM00038B [A] 2 26 6900999 INSTRUCTIONS 1 27 25K30112 O-RING 2 28 6725293 PLUG 1.55"(39,4 mm) O.D. x .75"(19,1 mm) long 2 29 6725295 BUSHING weld on - 1.55"(39,4 mm) I.D. - 2.50" (57,15 mm) O.D. x 4.06" (103,11 mm) long - Order Ref. 5, 32 & 33 2 30 7JM40 SNAP RING 2 31 6631067 SEAL, OIL 2 32 6731979 BUSHING weld on - 2.50" (57,15 mm) O.D. x 5.28" (134,11 mm) long - also order Ref. 5 & 33 2 33 743332 GREASE ZERK 5 2 34 6651709 SEAL See Illustration LIFT ARMS & BOB-TACH/ PE1625 2 35 6732443 CUP See Illustration LIFT ARMS & BOB-TACH/ PE1625 seal 2