. OPERATION MACHINE OPERATIONS AND CONTROLS Check Oil Level in Engine Oil Pan, Add Oil WARNING the engine is stopped and may cause serious burns. Wait for the oil 2. Remove dipstick (G), and wipe the oil off with a cloth. 3. Fully insert dipstick (G) into filler pipe, then remove it. REMARK When checking the oil level after the engine has wait for at least 15 minutes after stopping the checking. 3 - 79 Parts temperature to go down b efore performing this operation 1. Open the front cove r in the center of the e ngine hood 4. The oil level should be between the H and L marks on dipstick ( I ( G). f oil level is below t he L mark, add engine oil through f iller pipe F). 5.
I f oil is above the H mark, drain the excess engin e oil fr om drain l plug (P) at bottom evel. of the engine oil pan, then recheck the oil echec oil 6. I f oil level is correct, securely tighten the oi l filler cap a nd close t he engine hood. perated, engin I f the machine is at an angle, make it horizont al before ch ecking.