Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS Check Working Lamp Switch Turn the lamp switch to the ON position and check that the working lamp light up. If the lamps do not light up, there is probably a broken bulb or disconnection in the wiring, contact your Komatsu distributor for repairs. Check Electric Wiring WARNING 3 - 87 If the fuses frequently b low or if there are traces of sho rt circuits in the electrical wiring, locate the cause and immediately perform repairs, or cont act your Komatsu distributor for repairs . Keep the top surface of the battery clean and check t he b reather hole i n the battery cap.

If it is clo gged with dirt o r dust , wash the battery cap to clean the breather hole. Check for damage and w rong capacity of the fuse and any sign of disconnection or short ci rcuit in the electric w iring. Check also for loose ter minals and tighten any loose parts. Check the wiring of the "battery", "starting motor" and "alternator " carefully in Always check if there is any accumulation of flammable material around the battery, and remove such flammable material. matsu distributor for investigation and correction of the cause. Please contact your Ko matsu distributor for investigation and cor rection of Check Function of Horn 1. Turn the starting sw 2.

Confirm that the hor If the horn does not 1. Turn the starting sw 2. Confirm that the hor n sounds immediately when the horn but ton is sound, contact your Komats u distributor for repair.