Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS REMARK the suspension softer. Adjust the the 3 - 89 (D) Adjusting armrest a Armrest (5) can be ma de to spring up by hand ap prox. In addition, by turning t he bottom (6) of the armre st by hand i t is possible to m ake fine vertical adju stments of the armrest angle. Armrest adjustment an If the seat back is ti pped to the front without ra ising the ar mrest(5), armrest will rise automaticall If the cable at the re ar of armrest (5) is tense (when the se at back is tipped to the front), armres t (5) cannot be dial (6).

When adjusting t he angle of a rmrest (5), set the seat back to a posi tion where it is erations, then adjust the a rmres (E) Overall fore-and-af Move lever (7) to right, set to the desired position , then releas e the lever. In this case, the operator' s seat, left and right control levers, an d lock lever all slide togeth Fore-and-aft adjustme nt:180 mm (7.1 in) (9 stage (F) Adjusting suspensi Turn knob (8) to the ri reading of the dial to m atch the operator's weight and s elect t he optimum susp REMARK To obtain the optimum adjustment, turn the knob ( 8) so t hat the indicator of the w eight display (kg) in t he transparent portion of knob (8) is th e same as the operator's weigh t.

Rearview Mirrors Loosen screw (1) and screw (2) of the mirrors and adjust adjust mirrors to an angle wh ich gives the best view fro m the opera seat. In particular, adjust the mirrors so that you can see persons on the left and right sides at the rear of the machine .