. OPERATION MACHINE OPERATIONS AND CONTROLS STARTING ENGINE Normal Starting WARNING particularly careful to ensure good ventilation. NOTICE If it to the 3 - 94 Do no circui t attempt to start the t. Such an act may engine by short-circuiting the cause serious bodily injury or f Check then s Exhau that there are no p ound the horn and st gas is toxic.
Wh Befor e starting the engin e, check that the f uel control di al is at the low idle fuel control dial is a t the FULL position, the engine will accelerate suddenly and cause dam Do no t crank the starting motor continuously for more t han 20 seconds engine does not sta rt, wait for at leas t 2 minutes b REMARK If the en gine is stopped w hen it is not f ully warmed up and it is starte d again a few minutes l ater, there may be a delay in the e ngine rotation duri ng cranking . This is caused by fuel gas r emaining inside the cyl inder; it does not indicate any abn ormality.
In addit ion, even if t his phenomeno n occurs, ther e is no problem with th e reliability or durability of the eng ine or other parts. ck the lock lever (1) is in the LOCK position ( r is in the FREE position (F), the engine doe fuel control dial ( 2) at the low idle (MIN) posit is at the high idle (MAX) position, always ch n. idle (MIN) positio