Komatsu — AFTER STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS In Cold Weather Areas The automatic warming-up operation is canceled if the engine coolant temperature reaches the specified 3 - 103 (AUTOMATI C WARMING-U When startin g the engine in c old areas, c arry out the au tomatic warming-up operation aft When the en is performed f the engine wate r tempera ture is low (below 30°C (86°F), th e warming-up operation temperature (30°C (86 °F) or i f the warming-up operation continues for 10 minutes.

If the en gine coolant or hydraulic oil temperatu res are low after 10 minutes , continue to w arm the engine NOTICE Do not sudd enly accelerate the engine before the warming-up operation is complete Do not run t minutes. T d. he engine at low or high idle continuously for more than 20 his will cause oil leaks from the turbocharger oil supply piping. If it i to time or r Never perf s necessary to run un the engine at a orm operations o the engine at mid-range sp r operate th idle, apply a load from time eed. e control levers when the hydraulic oi operation u l is still a low temp ntil the hydraulic erature. Alwa oil temperatur ys continue the w e monitor displa arming-up y is green.

This will ext end the service lif e of the machine. REMARK If the hydraul ic oil temperatur e is low, the hydraulic oil te mperatur e monitor display will be . Turn fuel control dial (2) t o the mediu m speed positi . Set lock l ever (1) slowly a nd securely to th e FREE po sition (F), then rais e the bucket fro m the groun d.