Komatsu — RUNNING OUT OF FUEL

. OPERATION TROUBLES AND ACTIONS TROUBLES AND ACTIONS Procedure for Bleeding Air CAUTION more until no more Tightening torque: 4.9 to 6.9 Nm (0.5 to 0.7 kgm , 3.6 to 5.1 lbft) 8. Continue pumping (approx. 50 times) until the priming pump (2) becomes stiff and the overflow valve release 3 - 150 RUNNING OUT OF FU EL When sta rting the engine a gain after running out of fuel, fill with fuel, then bleed the air fro m the fuel system before starting t he engine. and be careful not to run out of fuel.

Always w atch the fuel level and be careful not to run out of fuel I f the eng ine has stopped b ecause of lack of fuel, it is necessary to use the priming pump t o bleed the air completely from the fuel circuit. This en gine consists of high er precision parts than on the conventional fuel injection pump and n ozzle, so if dirt gets in, it will cause problems. If there is any dirt stuck to the fuel line, use fuel to wash it off completely. Be care ful when opening th e air bleed plug at the f uel filter head and the air bleeder of the supp ly pump. The system is still under p ressure and fuel ma 1. Loos en air bleed plug ( A), (B) at the fuel filte 2.

Loos en the knob of prim ing pump (2), then pu mp the knob no m ore bubbles come out of air bleed plug 3. Wrap sealing tape arou nd air bleed plug (A) it. 4. Oper bubb 5. Tight les come out with en air bleed plug ( Tight ening torque: 4.9 t o 6.9 Nm (0.5 to 0.7 kg 6. Loos en air bleeder (3) of the supply pump. 7. Pum p priming pump (2 ) approx. 90 - 100 tim les come out with t eeder (3). 8. Cont inue pumping (app d becomes contin