. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE (1) lights up soon after NOTICE push the indicator button at the 4 - 21 6. Direct dr y compressed air (less than 0.69 MPa (7 kg/cm 9.4 PSI)) to the outer eleme nt from inside a long its fold hen direct it f rom outside along its folds and ag ain fro m inside. 1) Rem ove one seal from the element wh enever the e lement been cleaned. ace the outer el 2) Repl s repeatedly or us element at the s 6 Replace the 3) Repl lling the cleaned outer element ev en though it has not been cleaned 6 times 4) Chec k that there is no play in the inne r eleme nt. If any play is found, push it in pr 7.
Remove the cloth or tape cover installed i n Step 3 8. I f small h oles or thinner p arts are found o n the el emen t when t is chec ked by shining a li ght through it aft er cleaning, r eplace he elem When clean ing the element, do not hit or beat it a gainst a D o not use an element whose f olds or gasket or seal are damaged. 9. bottom o f the air cleaner t