. MAINTENANCE MAINTENANCE PROCEDURE REPLACE PILOT FILTER ELEMENT WARNING tighten with bolt (2). Tightening torque: 65 - 88 Nm (6.6 - 9.0 kgm , 47.7 - 65.1 lbft) When replacing the filter element, check O-rings (5) and (6) and (8) and gaskets (7). If any abnormality is found, replace with new parts. 4 - 60 The parts a nd oil are at hig h temperature after the engine is stopped, and may cause serious burns. Wait for the temperature to go down before cleanin g the engine b reather. When using compressed a ir, there is a h azard tha t dirt may be blown up and c Always use safety glasses , dust mask, o r other pr otective e quipment 1. Remove drain plug (1 ) and drain th 2.
Loosen b olt (2), then r emove filter case (3). 3. Replace filter element 4. Tighten drain plug (1). Tightening torque: 14. 7 - 19.6 Nm 5 - 2.0 kgm , lement toget 10.8 - 1 her with