. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE amount of oil 4 - 72 3. Remov through filler port (F) of the dipstick guide. 4. Wipe of f the oil on th e dipstick with 5. Fully ins ert dipstick ( G) into filler pip e, then remo 6. The oil l evel should b e between H a nd L marks o n the dipstick (G). If t he oil does no t reach the L m ark, add oil th rough oil f iller port (F). 7. If the oil is above the H mark , pull tu be (1) out, the n loosen plug (P). Aft er draining th e excess oil, c heck the oil l evel again . If the oil l hole. evel is correct, wind in tube (1) and store it inside the ately after changing the oil, oil level is variable.
ate for one hour, then check the oil level again. corre the 8. Immedi ately after ch anging the oil, oil level is va So oper ate for one h our, then chec k the oil level