. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE (A): Rear yourself. 4 - 85 5. the bottom of the chassis. Remove drain plug (P 1), then loosen plug (P2) and drain the oil. After oil, tighte n drain plugs (P1) an Tightening to rque: 70 ± 10 Nm ( 7 ± 1 6. Remove the 10 mounting b olts o f cove r (2), ta ke off the cover, then remove e bottom of th e pump s uction tube. 7. After draining the oil, tighten drain plug (3) and install cover (2). When loosen on 8. Tighten the b olts to install c over 9. Add the speci fied amount o f new and c lean oil t hrough o il filler port (F). Check that the o il level is between H and L on the sigh 10.
Bleed the air from the circu it afte r cleaning or replacing the filter element or strainer, o r after changing the oil.