Komatsu — CHECK BEFORE STARTING

. LOADING SHOVEL MAINTENANCE MAINTENANCE CHECK BEFORE STARTING Check Oil Level in Hydraulic Tank, Add Oil WARNING 7 - 16 If the oil filler cap is re moved without releasing t he interna l pressure, oil will spurt out, so tur n the oil filler cap slowly to re lease the i nternal pressure, then remove it c 1. If work equipme nt is not in the condition shown i n diagra m on the right, start engine, run a t lo w idle , retract the arm and bucket cylinder s, then lower the boom , set bu cket teeth in turn starting teet n contact with the ground, and s top the e ngine. 2.

Within 15 seco nds after stoppin g the engine, switch to the ON position, and operate t he contro l levers ( work equipment, trav pressure. el) in each direction to release the internal 3. Open cover (1) on the left side of t he ma chine an d check sight gauge (G). The oil level shoul d be betwe en the H and L marks. NOTICE Do n ot add oil if the lev el is above the H line . This will damag e the hydraulic equipment and cause the oil to spurt out.