. LOADING SHOVEL MAINTENANCE LOADING SHOVEL MAINTENANCE 6. After draining the oil, tighten drain plug (3) and install cover (2). When loosening drain plug (P2) be careful not to get oil on yourself. strainer (7). 7 - 20 5. Remove the 10 mo unting bolts of cove r (2), take off the cover, then bott om of the pum p suction tube 7. Remove 4 bolts, th en remove cover (4) . When doing t his, cover (4) m ay fly off bec ause of the force of keep the cove r pushed dow n when removing th 8. Hold 9. Remove any dirt st uck to strainer (7), th en wash in cl ean diesel oil or flushing oil. If strainer (7) is broke n, replace it w ith a new part. 10.
Whe n installing, in sert strainer (7) into protruding par t (8) of the tank, and assembl 11. Tighten the bolts t o install cover ( 12. Add the specified a mount of new and c lean oil throug h oil filler port (F). Check that the oi l level is between H and L on the sight gau ge. 13. Blee d the air from the circuit afte r cleaning or replac ing the filter element or strainer, or after changing the oil.