. SAFETY SAFETY MACHINE OPERATION OPERATION operator's cab, the machine the operation of the lever left and right steering is that there is no one in the the operator to ride on the windows of the operator's check that the door and the machine which cannot be 2 - 22 CHECKS BEFORE OPERATION When carrying out the checks, m ove the machine to a wide area where there are no obstructions, and operate the machine. slowly. Do not allow anyone near Check that the movement of th e machine matches the display on the control pattern card . If it does not match replace it immediately with the correct control pattern card.
uges and equipment, and check the operation of the bucket, arm, boom, trave ering system. Check the operation of the ga system, swing system, and ste Check for any problem in the s ound of the machine, vibration, heat, smell, or g auges; che ck also that the re is no leakage of oil or fuel. ut repairs immediately. If any problem is found, carry o SAFETY RULES FOR CHANGING Before traveling, set the machi the operator's seat. If sprocket (1) is in front of th moves in the opposite directio (front and rear travel is reve reversed). Be extremely carefu this situation.
Before travelling, check agai surrounding area, and that ther Before travelling, sound the ho Always operate the machine o Always fasten your seat belt. Do not allow anyone apart fr machine. Check that the travel alarm (if Always lock the door and compartment in position (open On jobsites where there is a haz entering the operator's compa windows are securely closed. If there is an area to the rear seen, position a signal person. machines or people when turni Always be sure to carry out the a machine is equipped with mirrors