. SAFETY SAFETY MAINTENANCE INFORMATION Set lock lever (1) to the LOCK position (L) to prevent the work equipment from moving. operated, give a signal to the other workers to warn them to move to a safe place. 2 - 35 TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNING To prevent per sonal injury, do not carry out maintenance with t he enginerunning . If maintenancemust be carri ed out with the engine running, carry out the operation with at least t wo workers and do as follows. One worker must always sit in the operato r's seat and be ready to stop the contact with engine at any time. All wo the other workers.
rkers must maintain When carry s, there is a hazard of being c aught in the parts, so ot to come close. h any control levers. If any c Do not touc Never drop or insert tools or other objects into the fan or fan belt . Parts may break or be PROPER TOOL S suited to the task and be sure to use the tools Use only tools correctly. Usin g damaged, low quality, fault y, makeshift tools or improper use o f the tools could cause seriou s personal injury. ACCUMULATO R tor is charged with high-pressure nitrogen gas.
The accumula When handlin g the accumulator, careless p rocedure may cause an explosion which could lead to serious injury or property this reason, always observe the following ssemble the accumulator. it near flame or dispose of it in fire. e holes in it, weld it, or use a cutting torch. roll the accumulator, or subject it to any impact. damage. For precautions. Do not disa Do not bring it near flame or dispose of it i Do not mak e holes in it, weld it, or use a c Do not hit or roll the accumulator, or subje ct it to any impact When dispo sing of the accumulator, the g as must be released. Please con performed. tact your Komatsu distributor to have this work