Komatsu — SWITCHES

. OPERATION DETAILED CONTROLS AND GAUGES Boom Shockless Control Switch Switch (13) controls the shaking of work equipment when the boom is stopped. Effect 3 - 33 The shaking and spillage o f load from the bucket is re Operator fatigue is reduced when operating for long pe riods, so operations can be perform REMAR K Wh en the switch is at the ON position (a) and the boo m is stopped, the movement o f the boom un til it stop s wil increase slightly. operation until you become accustomed to it.

Be c areful when using this operation until you becom e accustomed to The boom drifts down and it is difficult to position it, so set this switch to the OFF po sition (b) whe n carryin g out operations with a raised lo ad. Lower Wiper Switch Switch (14) operates lower w (a) ON position: Lower wiper (b) OF F position: Lower wipe If t his s witch is turned to the ON position at the same tim e as the wiper s witch, the wiper and lo wer wiper (A) will be actuate d in turn. REMAR If th time (14) If th e wiper on the monitor i s at the ON position and is operating continuously, and the lowe r wiper switch is turned ON, the wiper and lower wiper will be act uated in turn.

If th e lower wiper switch is at the ON position and is operating continuously, and the wi per is actuated with the machine monitor, the lower wiper ( actuated in turn. both INT and ON) and wiper will be Wh en the monitor wiper s witch is turned ON, if the lo wer wiper is a ctuated, wiper setting on the monitor is probably i utor change the setting. ncorrect, hav e your Komatsu distrib