. OPERATION DETAILED CONTROLS AND GAUGES If the key is Opening and Closing Caps with Lock Locking the Cap 3 - 45 CAP WITH LO Use the starting s witch key to open and cl ose the lo cks on the caps and For details of the l ocations of the caps and covers w ith locks, see "LOCKING Insert turned before it is inserted all the way, it m ay break. Opening the Cap into the key slot. ing switch key counterclockwise, align the key 1. 2. 1. Insert the key 2. Turn the start ing switch key counterclockwise, key slot with the m atch mark (3) on the cap , then op en the cap (1): Open (2): Lock REMARK A type is used for the fuel tank cap. B type is used for the if the cap rotates freely, it is locked.
In this ap cannot be removed from the tank. ng switch key counterclockwise, align counter e cap with the groove of the rotor, then turn the A hydraulic tank. With this type, cked. condition, the c ap cannot be r emoved f rom the ta Turn the starti ng switch key e cap with the counterclockwise, counter mark (3) on th groove of the rotor, urn the cap slowly unti l a click is heard. This re leases th e lock and the cap can be op ened. 1. Turn the cap until tight, then insert the key into t he key slo 2. Turn the key c ounterclockwise (but, fo r the B ty pe, tur n clockwise) and ta ke the key