Operation - Section 32 1/10 OM3234 Page 32-10 Operator Cab and Controls Statex III Download Port Statex III download port (13, Figure 32-7) is used by qualified personnel to access the STATEX III electric propulsion diagnostic information and data. PAYLOAD METER Payload meter (1, Figure 32-9) and payload meter download connector (2) are used to provide manage- ment with operational data, such as tonnage hauled and cycle times. Engine Diagnostic Port (CENSE) Refer to Section 60, Payload Meter III, for a complete description of the payload meter and its functions.
Engine diagnostic port (14, Figure 32-7) is used by qualified personnel to access the engine diagnostic information for the CENSE system. Refer to the engine manufacturer’s service publications for trou- bleshooting information. Payload Meter Download Connector Payload meter download connector (2, Figure 32-9) is used with a special cable to allow payload meter (1) to communicate with a portable computer. Modular Mining Port Modular mining port (15, Figure 32-7) is used if the optional modular mining system is installed on the truck. Passenger Seat Passenger seat (16, Figure 32-7) is mounted on top of the right-hand portion of the center console.
The area beneath the passenger seat provides a cabinet for various 24VDC electrical components. Consult the service manual for service involving any of these components. Engine Diagnostic Connectors Engine diagnostic connectors (17, Figure 32-7) are used by qualified personnel to access the engine Centry™ fuel control system diagnostic information. The Centry system is optional. FIGURE 32-9. PAYLOAD METER 1. Payload Meter 2. Payload Meter Download Connector Engine Diagnostics Connector Engine diagnostics connector (18, Figure 32-7) is used by qualified personnel to access engine diag- nostic information. This function is optional.
Data Storage Button Data storage button (19, Figure 32-7) is used to record a snapshot of the Statex III drive system and VHMS.