Operations Control Head Operation The boat will start to move during the next steps. Be very cautious when first engaging the gears to establish that forward is truly forward and reverse is truly reverse. A quick in-and-out of gear test is recommended. Ensure that the boat is clear of all obstacles forward and aft before conducting this test. Warning Identification Engine Trim Control: in the handle (optional) Lever Position Indicators: Adjustable Lever Feel Starboard Port Shift Detent Throttle Friction Select/change Station: Note: Station Protection may be turned on. See Appendix F. A lit green SELECT lamp indicates a station is active.
On single station boats, station selection is automatic. For multi-station boats, choose a station and then press SELECT button with levers in neutral. to Change Stations: Move to new station and press select button. ( Green lamp flashes.) Match control handle positions with those of active station. ( Green lamp goes steady when levers match and this station is now in control.) Indicator Dimming Feature: Push select button and the lamps will dim. There are four degrees of brightness from which to choose. NOTe: Indicator Dimming is only accessible from the ac- tive control station. (Green lamp on steady.) Electronic Control System:
Operation Manual for BY Series Engines with Unlimited Controls Page 12 © Yanmar 2008