hitachi — REMOVE AND INSTALL MAIN FRAME

UPPERSTRUCTURE / Main Frame 4. Remove hoses (6) (6 used) from the upper of center joint (5). Remove lock plate (7) from center joint (5). (Refer to the Remove and Install Center Joint section on W3-3-1.) 5 W16J-03-03-002 Rear 6 CAUTION: Upperstructure (8) weight: 17500 kg (38600 lb) IMPORTANT: Do not damage the engine due to special tool and the wire rope attached in the rear of main frame. 5. Install special tools (ST0232, ST0233) to the bracket at the mounting position for counterweight in the rear of main frame (2) with the bolts (M30, Pitch 3.0 mm) and the nut. Install the shackle (for 6.2 ton) to special tools (ST0232, ST0233) and attach a wire rope to the shackles (2 used).

Attach a wire rope onto the boom foot. Take up slack of the wire rope. If the chain block is used, the length of wire rope can be adjusted and it is easy to level the main frame. Shackle ST 0232 ST0233 Bolt W1J1-02-03-002 2 Counterweight Mounting Surface ST0232, 0233 Nut Bolt Counterweight Mounting Surface : 46 mm W1JB-02-03-001 2 Front Boom Foot W1JB-02-03-004 W2-3-2 7 6