hitachi — ASSEMBLE PUMP TRANSMISSION

UPPERSTRUCTURE / Pump Device Assemble Pump Transmission IMPORTANT: Clean rust prevention oil on the spline part of inner diameter in gears (5, 21). Apply grease to the spline part. 1. Install ball bearings (20, 22) to gear (21) by using a press. 2. Install retaining ring (18), coupling (19) and retaining ring (18) to gear (21). IMPORTANT: Install cartridge (24) to casing (12) with the stamped mark facing upward (the feeding pipe side). 8. Evenly tap and install cartridge (24) into casing (12) by using a plastic hammer. Stamped Mark Upper CAUTION: Casing (12) weight: 135 kg (298 lb) 3. Place casing (12) onto the workbench with the main pump mounting side facing downward.

Cartridge (24) W167-02-03-006 9. Install cartridge (24) to casing (12) with socket bolts (25) (10 used). CAUTION: The gear (21) assembly weight: 31 kg (68 lb) 4. Install the gear (21) assembly to casing (12) by using a bar and hammer. : 90 N m (9 kgf m, 66 lbf ft) : 19 mm CAUTION: Cartridge (24) weight: 20 kg (44 lb) 5. Install oil seal (26) to cartridge (24) by using a plate. 6. Apply grease to the inner lip part in oil seal (26). 7. Install O-ring (23) to cartridge (24). W2-4-25