UPPERSTRUCTURE / Pump Device IMPORTANT: Apply grease to valve plate (37). Check the direction of suction and delivery in valve plate (37). 13. Install O-rings (39) (8 used) and (40) (2 used) to pump casing (26). 14. Install spring pin (11), pin (53) and O-ring (27) to cover (52). Install valve plate (37) to cover (52). 18. Align the feedback lever in regulator (16) with tilt pin (15). Install regulator (16) to pump casing (26) with socket bolts (17) (6 used). : 6 mm : 29 N m (3 kgf m, 21.4 lbf ft) NOTE: As for the positions of regulator (16) and socket bolt (17), refer to W2-4-28. 19. Install O-rings (22) (2 used) to plugs (23) (2 used).
Install the plug (23) assemblies (2 used) to pump casing (26). NOTE: Align the pin hole on valve plate (37) with pin (53) and install valve plate (37). 15. Install cover (52) to the pump casing (26) assembly with socket bolts (29) (4 used). : 36 mm : 17 mm : 170 N m (17 kgf m, 125 lbf ft) 20. Install O-rings (39, 40) to cover (52). Install cover (48) to cover (52) with socket bolts (49) (3 used). : 490 N m (50 kgf m, 361 lbf ft) 16. Align the splines and install booster (43) to drive shaft (5). 17. Install O-rings (44, 45) to cover (46). Install cover (46) to cover (52) with socket bolts (47) (6 used). : 5 mm : 12 N m (1.2 kgf m, 8.9 lbf ft) : 8 mm : 57 N m (5.8 kgf m, 42 lbf ft) W2-4-37