hitachi — ASSEMBLE FAN PUMP

UPPERSTRUCTURE / Pump Device IMPORTANT: Apply grease to valve plate (39). Check the direction of suction and delivery in valve plate (39). 12. Install O-rings (26) (8 used) to pump casing (27). 13. Install spring pin (11), pin (47) and O-ring (41) to cover (46). Install valve plate (39) to cover (46). NOTE: Install valve plate (39) while aligning the pin hole on valve plate (39) with pin (47). 14. Install cover (46) to the pump casing (27) assembly with socket bolts (31) (4 used). : 240 N m (24.5 kgf m, 177 lbf ft) 15. Align the feedback lever in regulator (20) with tilt pin (19). Install regulator (20) to pump casing (27) with socket bolts (21) (6 used). : 14 mm : 6 mm :

29 N m (3 kgf m, 21.4 lbf ft) NOTE: As for the positions of regulator (20) and socket bolt (21), refer to W2-4-50. 16. Install O-rings (18) (2 used) to plugs (17) (2 used). Install the plug (17) assemblies (2 used) to pump casing (27). : 27 mm : 110 N m (11 kgf m, 81 lbf ft) W2-4-57