UPPERSTRUCTURE / Fan Motor 9. Remove split pin (28). Remove pin (29) from fork end (27). 10. Remove bolts (24) (4 used) and washers (25) (4 used). Remove the bracket (26) assembly from shroud (23). 23 24, 25 26 27 28, 29 : 19 mm 11. Remove split pin (34) and pin (35). Lay down stay (33) to the engine side. 12. Remove bolts (31) (4 used) and washers (32) (4 used). Remove bracket (30) from shroud (23). W1JB-02-12-006 : 19 mm 13. Remove bolts (38) (5 used). Remove cover (37) from bracket (36). 33 W1JB-02-13-007 38 : 17 mm 14. Remove hose (40) from adapter (39). Cap the open ends. W1JB-02-12-009 36 41 39, 40 : 27 mm 15. Remove hoses (42) (4 used) from fan valve (41). Cap the open ends. :
36 mm 42 42 W1JB-02-12-008 W2-12-10 23 30 31, 32 34, 35 36 37