hitachi — REMOVE AND INSTALL TRAVEL DEVICE

UNDERCARRIAGE / Travel Device REMOVE AND INSTALL TRAVEL DEVICE CAUTION: Release any pressure in the hydraulic oil tank before doing any work. (Refer to BLEED AIR FROM HYDRAULIC OIL TANK on W1-4-1.) Removal Before removing the travel device, the tracks must be removed first. For removal and installation of the tracks, refer to REMOVE AND INSTALL TRACK on W3-7-1. In this section, the procedure starts on the premise that the tracks have already been removed. 1. Remove bolt (4). Install eyebolt (M16, Pitch 2.0 mm) into the hole. Attach a nylon sling onto eyebolt and hold cover (5). 1 4 2, 3 : 24 mm 5 CAUTION: Cover (5) weight: 46 kg (100 lb) 2. Remove bolts (2) (7 used) and washers (3) (7 used).

Remove cover (5) from track frame (1). 24 mm IMPORTANT: Attach an identification tag onto the removed hoses for assembling. 3. Remove hoses (8, 9) from travel device (12). Cap the open ends. W800-03-02-001 1 7 8 9 : 22 mm, 27 mm 4. Remove socket bolts (14) (8 used) and split flanges (13) (4 used). Remove hoses (7, 15) from travel device (12). Cap the open ends. 10, 11 12 : 10 mm 15 14 13 W800-03-02-002 W3-2-1