hitachi — REMOVE AND INSTALL TRAVEL DEVICE

UNDERCARRIAGE / Travel Device 3. Install hoses (8, 9) to travel device (12). : 22 mm : 39 N m (4 kgf m, 29 lbf ft) : 27 mm 8 9 : 78 N m (8 kgf m, 58 lbf ft) 12 W800-03-02-002 CAUTION: Cover (5) weight: 46 kg (101 lb) 4. Install eyebolt (M16, Pitch 2.0 mm) to cover (5). Attach a nylon sling onto eyebolt. Align with the mounting hole on track frame (1). 5. Install cover (5) to track frame (1) with bolts (2) (7 used) and washers (3) (7 used). 1 4 2, 3 5 : 24 mm : 210 N m (21.5 kgf m, 155 lbf ft) 6. Remove eyebolt. Install bolt (4) to cover (5). W800-03-02-001 : 210 N m (21.5 kgf m, 155 lbf ft) IMPORTANT: After completing the work, check the oil level.

Start the engine and check for any oil leaks. In order to prevent the travel motor from seizing, perform the break-in operation after installation. : 24 mm Condition 1. Engine control dial: Slow idle speed 2. Travel mode switch: Slow 3. Operation duration: Over 2 minutes W3-2-3