hitachi — ASSEMBLE TRAVEL DEVICE

UNDERCARRIAGE / Travel Device CAUTION: Travel reduction gear including sprocket weight: 955 kg (2110 lb) 40. Wind a nylon sling between the flange part in housing (5) and gap in support, and tighten them. Hoist and turn over the travel reduction gear. 41. Add gear oil (19 L, 5 US gal.) into the travel reduction gear. 42. Apply grease to O-ring (4). Install O-ring (4) to motor (3). CAUTION: Motor (3) weight: 135 kg (300 lb) 43. Install eyebolts (M12, Pitch 1.75 mm) (2 used) into the lifting hole on motor (3). Hoist motor (3). Align the spline of shaft (42) with that of motor (3) and install motor (3) to housing (5). 5 9 3 Eyebolt Mounting Positions W16J-03-02-002 44.

Install motor (3) to housing (5) with bolts (1) (4 used) and spring washers (2) (4 used). : 27 mm : 300 N m (30 kgf m, 221 lbf ft) W3-2-21