UNDERCARRIAGE / Travel Device Disassemble Brake Valve IMPORTANT: Do not disassemble overload relief valves (5) (2 used). Replace overload relief valve (5) as assembly. Attach a tag on each overload relief valve (5) so that they can be installed to their original positions. Do not rotate set screw (34). The set- ting pressure can change. 5. Loosen plug (32). Remove overload relief valve (5) from valve housing (46). (2 places on both right and left) CAUTION: The valve housing (46) assembly weight: 40 kg (90 lb) 1. Secure the valve housing (46) assembly on a firm workbench. 2. Remove plugs (6, 15) and O-rings (7, 14). Re- move spring (8) from valve housing (46). : 10 mm IMPORTANT:
Rotate and remove valve assembly (13). If a little resistance is felt while removing, do not try to remove it by force, return to original position and retry. Do not disassemble valve assembly (13). Replace the valve housing (46) assembly including spool assembly (50), valve assembly (13), orifices (11, 49) and the orifice plug. 3. Lightly press valve assembly (13). Rotate and remove valve assembly (13) from valve housing (46) by hand. 4. Remove plug (1). Remove O-ring (2), spring (3) and check valve (4). (2 places on both right and left) : 36 mm 6. Push cap (36). Evenly loosen and remove socket bolts (35) (4 used). Remove cap (36) from valve housing (46).
(2 places on both right and left) NOTE: In case cap (36) cannot be removed, a plastic hammer can be used to tap cap (36), Tap cap (36) with the loosened socket bolt (35) attached on cap (36). 7. Remove spring seat (38), spring (39) and spring seat (40) from valve housing (46). (2 places at right and left) IMPORTANT: Rotate and remove spool assembly (50). In case a little resistance is felt while removing, do not try to remove it by force, return to original position and retry. 8. Lightly push spool assembly (50). Rotate and re- move spool assembly (50) from valve housing (46) by hand. 9. Clamp spool assembly (50) in a vise by using wooden pieces. 10. Remove plugs (41) (2 used).
Remove springs (43) (2 used) and check valves (44) (2 used) from spool (45). : 10 mm : 14 mm W3-2-33