UNDERCARRIAGE / Track Adjuster REMOVE AND INSTALL TRACK AD- JUSTER Before removing and installing the track adjuster, the tracks and the front idler must be removed first. For removal and installation of the tracks and the front idler, refer to applicable removal and installation sec- tions. In this section, the procedure starts on the premise that the tracks and the front idler have already been removed. CAUTION: When removing track adjuster (1), track adjuster (1) may fly off due to the spring force. Do not stand in the same direction to remove track adjuster (1) or where track adjuster (1) flies off. The rod screw is loaded by spring force.
Be alert if the rod or screw section is broken, the broken pieces may fly out by spring force, so that personal injury and/or death may cause. 2 1 W142-03-04-002 Removal CAUTION: Track adjuster (1) weight: 491 kg (1080 lb) 1. Pry and remove track adjuster (1) from track frame (2) by using a pry bar. 4 3 A Installation 1. As illustrated, install track adjuster (1) into spring guide (3) on side frame (2). Check that the end of track adjuster (1) comes in contact with that of plate (4). W17V-03-04-002 2 3 W800-03-04-004 View A W3-4-1