hitachi — DISASSEMBLE TRACK ADJUSTER

UNDERCARRIAGE / Track Adjuster 4. Slowly return the piston of special tool (ST 4932) until spring (13) extends to its free length. CAUTION: The cylinder (12) assembly weight: 153 kg (340 lb) 7. Remove a nylon sling from spring (13). Attach a nylon sling on cylinder (12) and pass a nylon sling through eyebolt. Hoist and remove the cylinder (12) assembly from spring (13). NOTE: Spring (13) free length: 1004.5 mm (39.5 in) CAUTION: Track adjuster weight: 491 kg (1080 lb) 5. Bind bracket (15) and spring (13) together by us- ing a wire. Attach a nylon sling to spring (13) on the track adjuster. Hoist and remove the track adjuster from special tool (ST 4932). W17V-03-04-004 W142-03-04-005 6.

Install eyebolt (M16, Pitch 2.0 mm) to piston rod (4). Attach a nylon sling onto spring (13). Pass a nylon sling through eyebolt. Hoist and place the assembly on the holder. CAUTION: Spring (13) weight: 266 kg (590 lb) 8. Remove the wire fastening spring (13) and bracket (15). Hoist and remove spring (13). CAUTION: Bracket (15) weight: 34 kg (75 Ib) 9. Remove spacer (14) and bracket (15) from the holder. Holder W142-03-04-006 W3-4-5 Eyebolt 12 13 Holder ST 4932 15 13 Eyebolt 4 13