UNDERCARRIAGE / Track Adjuster CAUTION: Bracket (15) weight: 34 kg (75 lb) Spring (13) weight: 266 kg (590 lb) CAUTION: Do not tilt spring (13) over. 5. Set the wire on the holder. Place bracket (15), spacer (14) and spring (13) on the holder by us- ing a nylon sling. Bind bracket (15) and spring (13) together by using pieces of wire. CAUTION: The cylinder (12) assembly weight: 153 kg (340 lb) 6. Install eyebolt (M16, Pitch 2.0 mm) to piston rod (4). Attach a nylon sling. Hoist and install the cyl- inder (12) assembly while aligning with spacer (14) and bracket (15). CAUTION: Track adjuster weight: 491 kg (1080 lb) 7. Attach a nylon sling to spring (13).
Pass a nylon sling through eyebolt in piston rod (4). Hoist and lay down piston rod (4) horizontally and slowly. W17V-03-04-004 IMPORTANT: Set rod (10) with its grease outlet facing downward. 8. Hoist and set the track adjuster on special tool (ST 4932). Remove eyebolt and the nylon sling. W142-03-04-006 ST 4932 W142-03-04-005 W3-4-11 14 13 15 Eyebolt 12 Rest 4 13 S T