UNDERCARRIAGE / Track Adjuster IMPORTANT: Slowly compress spring (13) while aligning rod (10) with the center of bracket (15) by using a pry bar. Do not damage the threads in rod (10). 9. Operate the cylinder of special tool (ST 4932). Remove the wire. Compress spring (13) until the specified spring length is obtained. (Specified Spring Length: 805 mm (31.7 in)) 13 ST 4932 IMPORTANT: Align the matching marks made when disassembling. Align the grease outlets both in rod (10) and nut (16). 10. Install nut (16) to rod (10). Install bolt (18). 15 Wire : 140 mm : 19 mm : 59 N m (6 kgf m, 44 lbf ft) 11. Tighten valve (17). W142-03-04-015 : 24 mm : 147 N m (15 kgf m, 108 lbf ft) 12.
Retract the cylinder of special tool (ST 4932). CAUTION: Track adjuster weight: 491 kg (1080 lb) 13. Attach a nylon sling to the track adjuster. Hoist and remove the track adjuster from special tool (ST 4932). W17V-03-04-006 CAUTION: If the spring assembly must be transported, do not damage it. Use a firm steel box for transportation of the spring as- sembly and take any other precautions in order to insure safe transportation. W3-4-13 18 10 16 17 18