hitachi — REMOVE AND INSTALL FRONT IDLER

UNDERCARRIAGE / Front Idler REMOVE AND INSTALL FRONT IDLER Removal Before removing the front idler, the tracks must be removed first. For removal and installation of the tracks, refer to “Remove and Install Tracks” on W3-7-1. In this section, the procedure starts on the premise that the tracks have already been removed. CAUTION: When removing the front idler, the front idler may fly off due to the strong spring force. Do not stand in the same direc- tion to remove the front idler or where the front idler flies off. W142-03-05-002 CAUTION: Front idler weight: 574 kg (1270 Ib) 1. Pry and remove the front idler still with the yoke attached from track frame (2) by using a pry bar. 2.

Attach a nylon sling to bearing (5) and yoke (4) sections as illustrated. Hoist and remove the front idler assembly from track frame (2). 3. When storing the front idler, place the front idler on the wooden blocks as illustrated. Installation W142-03-05-003 Wooden Block Wooden Block W105-03-05-003 CAUTION: Front idler weight: 574 kg (1270 Ib) 1. The procedures to install the front idler are just the reverse of those for removal. Pay attention to following: Apply grease to the bearing (5) sliding surface on track frame (2) after cleaning. Installing Direction 2 5 W142-03-05-005 W3-5-1 oving Direction 1 5 4 3 2