hitachi — ASSEMBLE FRONT IDLER

UNDERCARRIAGE / Front Idler IMPORTANT: Apply grease to floating seal (3). 7. Install the other floating seal (3) to idler (7) and bearing (2). IMPORTANT: Apply LOCTITE #503 to plug (8). 12. Install plug (8) to bearing (2). : 6 mm : 20 N m (2 kgf m, 14.5 lbf ft) CAUTION: Bearing (2) weight: 52 kg (115 lb) IMPORTANT: Align the matching marks made when disassembling. 8. Apply grease to the inner surface of bearing (2). Tap the end of bearing (2) evenly by using a plas- tic hammer while aligning the holes for pin (1). Insert pin (1) into bearing (2) by using a bar and hammer. CAUTION: Yoke (12) weight: 71 kg (160 lb) 13. Wind a nylon sling to yoke (12).

Hoist and align the bolt (13) hole on yoke (12) with that on bear- ing (2). 14. Install spring washers (14) (4 used) to bolts (13) (4 used) respectively. Install yoke (12) to bearing (2) on both sides with bolts (13) (4 used). : 36 mm : 700 N m (70 kgf m, 510 lbf ft) 15. Install spring washer (11) to bolts (10) (4 used) re- spectively. Install guard (9) to yoke (12) with bolts (10) (4 used). : 19 mm : 90 N m (9 kgf m, 65 Ibf ft) W17P-03-05-003 9. Fill engine oil (API CD Class SAE30) 0.5L (0.132 US gal.) via the plug (8) hole on bearing (2). IMPORTANT: Apply LOCTITE #503 to plug (8). 10. Install plug (8) to bearing (2). : 6 mm : 20 N m (2 kgf m, 14.5 lbf ft) CAUTION:

The idler (7) assembly weight: 503 kg (1110 lb) 11. Attach a nylon sling to the idler (7) assembly. Hoist and turn over the idler (7) assembly. W3-5-9 2 3 5 4 7 2 2 3 4 7