FRONT ATTACHMENT / Front Attachment 8. After installing the arm, apply grease to the boom/arm joint pin and the arm cylinder rod side by using a grease gun. As for the machine equipped with the auto lubri- cation device (optional), turn the auto lubrication switch ON. 9. After completing the work, add hydraulic oil to the specified level. 10. Operate every cylinder fully to the stroke end several times and release the pressure in the cir- cuit. Check for any oil leaks at the hose connec- tion. 11. Install the bucket. (Refer to Installation of Bucket on W4-1-4.) Boom/Arm Connecting Part (Right) Arm Cylinder Rod Side Boom/Arm Connecting Part (Left) W1J7-04-01-018 W4-1-11