hitachi — REMOVE AND INSTALL CYLINDER

FRONT ATTACHMENT / Cylinder Installation 5. Hoist arm cylinder (6). Remove the wire to secure the rod. Start the engine. Extend the cylinder rod. Align the pin hole on arm cylinder (6) rod side with that on arm (2). CAUTION: Arm cylinder (6) weight: 1200 kg (2650 lb) 1. Hoist arm cylinder (6). Align the pin hole on arm cylinder (6) bottom side with that on boom (10). CAUTION: Pin (1) weight: 44 kg (97 lb) 2. Hoist pin (1). Insert pin (1) into the pin hole on arm cylinder (6) bottom side. Install bolts (3) (2 used), spring washers (4) (2 used) and plate (5). CAUTION: Pin (1) weight: 44 kg (97 lb) 6. Hoist pin (1). Insert pin (1) into the pin hole on cylinder rod side.

Install pin (1) to arm (2) with bolts (3) (2 used), spring washers (4) (2 used) and plate (5). : 30 mm : 30 mm : 390 N m (40 kgf m, 290 lbf ft) 3. Install hoses (9) (2 used) to the bottom side of arm cylinder (6) with socket bolts (8) (8 used) and split flanges (7) (4 used). : 390 N m (40 kgf m, 290 lbf ft) 7. Install the lubrication hose to the rod side of arm cylinder (6). : 19 mm : 265 N m (27 kgf m, 195 lbf ft) 4. Install the lubrication hose to arm cylinder (6). : 14 mm : 29.5 N m (3 kgf m, 21.5 lbf ft) IMPORTANT: After all work is completed, operate the arm cylinder to the stroke end several times and release the pressure in the circuit. (Refer to W4-2-14.) : 19 mm :

29.5 N m (3 kgf m, 21.5 lbf ft) W4-2-9