hitachi — DISASSEMBLE CYLINDER

FRONT ATTACHMENT / Cylinder 5. Remove set screw (13). Remove steel ball (14) from nut (21). Boom cylinder, Bucket cylinder CAUTION: Cylinder rod (1) weight: Boom cylinder: 380 kg (840 lb) Arm cylinder: 508 kg (1120 lb) Bucket cylinder: 286 kg (630 lb) : 14 mm Arm cylinder : 17 mm NOTE: Set screw (13) has been crimped by using a punch at two places after installing. Cut away the crimped position by using a hand drill and remove set screw (13). 6. Remove nut (21) and piston (16) from cylinder rod (1) by using special tool (ST 5908). Special tools when turning nut: Boom cylinder : 155 mm (ST 3285) Arm cylinder : 180 mm (ST 3278) Bucket cylinder : 150 mm (ST 3284) 7.

Remove slide rings (17, 18) (2 used for each), seal ring (19) and O-ring (20) from piston (16). CAUTION: Cylinder head (4) weight: Boom cylinder: 57 kg (125 lb) Arm cylinder: 63 kg (140 lb) Bucket cylinder: 45 kg (99 lb) 8. Remove cushion bearing (15) and cylinder head (4) from cylinder rod (1). 9. Remove backup ring (10) and O-ring (11) from the outer side of cylinder head (4). 10. Remove wiper ring (2), backup ring (5), U-ring (6), buffer ring (7), retaining ring (9) and bushing (8) from the inner side of cylinder head (4). W4-2-21