GENERAL / Tightening Torque PIPING JOINT IMPORTANT: The torques given in the chart are for general use only. Do not use these torques if a differ- ent torque is given for a specific ap- plication. Union Joint Metal sealing surfaces (4) and (5) of adapter (1) and hose (2) fit together to seal pressure oil. Union joints are used to join small-diameter lines. IMPORTANT: 1. Do not over-tighten nut (3). Ex- cessive force will be applied to metal sealing surfaces (4) and (5), possibly cracking adapter (1). Be sure to tighten nut (3) to specifi- cations. 2. Scratches or other damage to sealing surfaces (4) or (5) will cause oil leakage at the joint.
Take care not to damage them when connecting/disconnecting. Joint Body 37 ° 30 ° Female Union Joint Male Union Joint W105-01-01-017 to tightening torque of 37 ° female. W1-2-5 1 4 3 5 2 M202-07-0 Description Wrench Size mm Wrench Size mm Tightening Torque Union Nut Hose Fittings N⋅m (kgf⋅m, lbf⋅ft) 30°male 17 19 22 27 32 36 41 17 19 22 27 32 36 41 24.5 (2.5,18) 29.5 (3.0,21.5) 39 (4.0,28.5) 93 (9.5,69) 137 (14.0,101) 175 (18.0,129) 205 (21.0,151) 37°female 17 19 22 27 32 36 41 14 17 19 22 27 32 36 24.5 (2.5,18) 29.5 (3.0,21.5) 39 (4.0,28.5) 93 (9.5,69) 137 (14.0,101) 175 (18.0,129) 205 (21.0,151) NOTE: Tightening torque of 37°male coupling without union is similar