Toyota — INSPECTION

1-6 INSPECTION 1. Electrolyte level inspection Open the cap, and if the white line on the red float has dropped, water should be added. Add water until the white line appears. Stop water addition when the white line appears, since addition is excessive when the tip end of the float comes into contact with the stopper. As a level gauge is provided at the front of the battery case, the electrolyte level can generally be checked at a glance, but open the cap to check the level when making a periodic inspection. The green light of the level gauge lights up to indicate activation of the level gauge sensor, and the red light flashes to indicate the necessity of adding water. Note:

Never change the installation location of the sensor. Reference: The consumption of electrolyte can be calculated by the following equation: Consumption (cc) = 5 hour capacity Ч 0.0336 Ч number of cells Ч number of charges Red light Green light Normal level Off On Insufficient level Blinking On Vehicle model Number of cells Battery capacity (AH/5HR) 7FBE10 24 280 7FBE13 ↑ ↑ 7FBE15 ↑ 390 7FBE18 ↑ ↑ 7FBE20 ↑ ↑