2-24 3. The magnetic switch is not suctioned when the charging button is pressed. Display screen check See "2.The charging screen does not appear though the AC power plug is connected." on page 2-23. (No display) NG OK (Charging screen display) Inspection 1 Magnetic switch voltage check NG Inspection 2 Charging button check OK OK NG Switch box defect Display defect Magnetic switch (MSch) defect INSPECTION 1. Magnetic switch voltage inspection (See page 2-20.) INSPECTION 2. Charging button inspection (See page 2-21.) 4. Charging completes normally but the charge is insufficient.
Battery and transformer capacity compatibility check (See page 2-2.) NG Capacity incompatibility OK Tap voltage check (See page 2-6.) NG Tap adjustment defect OK Individual transformer check (See page 2-12.) NG Transformer defect ANL : I/O MONITOR1 I/O1-8 Battery voltage check (comparison between displayed value and actually measured value) NG (other than OK) CPU board defect OK within ± 2 % from the actually measured value Battery electrolyte specific garvity and temperature check after completion of charging NG Battery defect (Check if corrected by equal charging) OK Ч Decreased capacity due to lowering of electrolyte temperature Ч Decreased capacity due to battery service life 5.
Charging progress indicator does not proceed during the timer test. Display defect