Doosan D80S-5 — Doosan D80S-5 User Manual

Maintenance Section Tilt Cylinders - Check, Adjust, Lubricate Crosshead Rollers - Inspect 1. Operate the mast through a lift cycle. Watch the chains move over the crosshead rollers. Make sure the chain is tracking over the rollers properly. Chassis Pivot Eyebolts Typical Example Typical Example 1. Lubricate two fittings for the pivot eyebolts, one on each tilt cylinder. 2. Check the pivot eye pins for loose retainer bolts and wear. Mast Pivot Eyes 2. Check for damaged crosshead rollers, guards and retainer rings.

Transmission Oil Filter (2 Speed Only) – Change Only for D50/60/70S-5(2 Speed), G50/60/70S-5 See topic, "Transmission Oil & Oil Filter - Change" in "First 50-100 Service Hours or a Week". Parking Brake - Test, Adjust See topic, "Parking Brake - Test, Adjust " in " First 50-100 Service Hours or a Week." Drive Axle Oil (OCDB) - Change See topic, "Drive Axle Oil - Change" in "First 50-100 Service Hours or a Week". Typical Example 1. Lubricate two fittings for the mast pivot eyes, one on each side of the mast. 2. Check the pivot eye pins for loose retainer bolts and wear. 169