Operation Section Lift Truck Controls Direction Control Lever “LOCK” the direction control lever. Whenever machine is parked, "LOCK" the direction control lever in "NEUTRAL" to prevent accidental machine movement. Transmission Display (3 Speed Only) A transmission display is to the right of the steering wheel on the dash. The LCD indicates gears, direction of travel and error codes. Typical Example Forward – Reverse Speed Select (A) Indicates travel direction and gear selection. See the figure below for more detailed information. (B) Indicates normal operation and error codes. For a list of error codes, see "Transmission Error Codes" in "When Required" maintenance section. NOTE :
Most codes are only two digits. (C) Indicates that error codes have occurred and are stored. (D) Indicates that operation must be stopped immediately to prevent damage to transmission and hazardous operation condition. Rotating the direction control lever changes the speed of travel. With handle rotated counter clockwise (towards the operator), the lift truck is in FIRST speed. Rotate the lever clockwise (away from the operator) for the SECOND and THIRD speeds. Always brake to a full stop before reversing the direction of travel. Do not fail to place the forward-reverse lever in the neutral position before starting the engine.
Neutral Lever Lock (3 Speed Only) FORWARD INDICATOR GEAR RANGE INDICATOR BARS REVERSE INDICATOR A transmission neutral lever lock is in base of the direction control lever. This neutral lever lock prevents the direction control lever from being moved out of "NEUTRL". N "NEUTRAL LOCK" position. Prevents the direction control lever to be moved out of "NEUTRAL". D "DRIVE" position. Allows the direction control lever to be moved from "NEUTRAL" to "FORWARD and REVERSE". The gear range indicator bars will indicate which gear is selected by displaying the corresponding number of bars. The forward and reverse indicator bars will be "OFF” when the transmission is in "MANUAL MODE".
When transmission is in "AUTOMATIC MODE", all the gear range indicator bars and both travel direction indicators will be "ON". 56 WARNING F Forward N Neutral R Reverse 1 1st 2 2nd 3 3rd (3 speed ONLY)