. OPERATION EXPLANATION OF COMPONENTS MACHINE MONITOR MODE SELECTOR SWITCH 2 position. 2nd E mode o 1st E mode o 1st P mode When using P mode 2nd P mode o 1st P mode If the transmission is in auto-shift, and the travel speed is below 10.5 km/h (6.5 MPH) in any speed range when traveling in either forward or in reverse, the kick-down switch is actuated and it is possible to shift down to 1st. This makes it easy to carry out load and carry operations. Even if the travel speed is more than 10.5 km/h (6.5MPH), this switch can be used to shift the transmission down. Each time the kick-down switch is pressed, the speed range will shift down one range at a time (F4 -> F3 -> F2).
3 - 46 This switch display. When the s witch is released , it automatically returns t o its original The b asic o peration is as fol lows. Position (>) : Press here to g o on to the next screen, or to move the cursor forward entering numer , or to increase the number when als o back to the previous screen, or to Position ( : Press here to g to move the curso entering numer r back, or to reduce the n umber when als KICKDOWN SWITCH When the g ear shift lever is at F2, if switch (14) at the head of the lift ar m cont rol lever is presse d, the transmission will sh ift down one range Use t operations.
When the tr ansmission shift range is in FORWARD 1st (F1) and the p ower mode selector s witch is at E is pressed, it i s possible to swi tch to P mode. Use t his fun ction during scr operations when it is desired to further increase the li fting force. When using