. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS 3 - 56 To set to the desire d speed range when traveling uphill or downhill, or when carrying o ut grading, do as follows When fixing the Press the HOLD The speed rang transmission ind switch on the lift arm c ontrol lever. e is fixed at the speed r ange displayed on the icator on the machine m onitor When shifting up or down from set spee d rang Shift gear with th REMARK When the transmis sion has been shifted d own fr om 2n d to 1st with the k ickdown switch, it will shift up from 1st to 2nd when the trave l speed increases.
DIRECTIONAL LEV ER This lever (2) is use d to switch the direction of trav el of th e machine between forward a nd reverse. engine, if the directional lever is not at the N will not start. When starting the position, the engine In this case, the ce ntral warning lamp will light up and the buzzer t lever to the N position and start the engine. rd al se ight u p and the buzzer will sound. Return the gearshif t lever to the N position and s tart th e engine. Position (F): Forwa Position (N): Neutr Position (R): Rever REMARK The lever length c an be set to 2 levels (positions (A) t your Komatsu distributor.
ed to position (A) when delivered.) ositio adjustment, consul t your Komatsu distribut (The lever is install ed to position (A) when For GEARSHIFT LEVER STOPPER This stopper (3) pre vents the gearshift leve r from entering the 3rd or 4th positions wh en working. er actuated. er released. Position (a): Stopp Position (b): Stopp