. OPERATION TROUBLESHOOTING IF BATTERY IS DISCHARGED WARNING battery, stop the engine and turn the wear safety glasses and rubber 3 - 169 It is dangerous to charge a batter sure that it is dismounted before When checking or handling the b starting switch key to the OFF po The battery generates hydrogen g Do not bring lighted cigarettes ne cause sparks. Battery electrolyte is dilute sulfur and skin. If it gets on your clothes off with a large amount of water. I fresh water and consult a doctor. When handling batteries, alway gloves. When removing the battery, first d (normally the negative (-) terminal (+) terminal first.
If a tool touches the positive term that it will cause a spark, so be ex If the terminals are loose, there is generate sparks that will cause an When removing or installing the t (+) terminal and which is the nega REMOVAL AND INSTALLAT ION OF BATTERY 1. Before removing battery, rem touches between the positive nuts of the terminal and rem 2. After installing the battery, fix Tightening torque: 2 to 2.9 N (0.2 to 0.3 3. When installing the battery, c Insert the hole of the termina Tightening torque: 5.9 to 9.8 (0.6 to 1. 1. Before removing battery, rem ove the ground cable (normally connected to the negetive (-) t erminal).
If any tool terminal and the chassis, there is danger of s parks being gen erated. Loose n the ove the wires from the battery. it with the battery hold down. m kgm, 1.4 to 2.2 lbft) onnect the ground cable last. l on the battery and tighten the nut. Nm 0 kgm, 4.3 to 7.2 lbft) 3. When installing the battery, c l on the battery and tighten the nut REMARK The batteries are on both sides a t the rear of the machine. The battery used fo r the ground is o n the left side o f the machine.