. ATTACHMENTS, OPTIONS HANDLING JOYSTICK STEERING SYSTEM ATTACHMENTS, OPTIONS HANDLING JOYSTICK STEERING SYSTEM ON/OFF switch to 6 - 17 1. When startin g the engine, check that the joy stick lever is at the N position, t position, and hat the transmission directiona l lever is at the N fe. that the surrounding area is sa REMARK Under the follow ing conditions, a warning may be given when the engine is started . If the directio nal selector switch on the joysti ck is at F or R, the joystick pilot l amp flashes, the central warni buzzer sounds. ng lamp lights up, and the alarm In this conditi on, the engine will not start, so set the directional selector switc h to N.
is not at the N position, the joystick pilot lamp central warning lamp lights up, and the alarm s. If the joystick flashes, the buzzer sound In this conditi on, the engine will not start, so set the joystick to the N position . 2. When using the joystick, set the joystick position (a) t o activate the joystick steering 3. Operate the joystick in direction (b) to turn t he machine to the right; operat The greater speed beco e it in direction (a) to turn the m achine to the left. the angle of operation, the faster the articulating mes. 4. It is possible to switch the articulating spee d with the HI/LOW selector swit Select the sp ch. eed to match the operation. 5.
When the m achine has articulated to the de sired angle, return the joystick t The joystick o the N position. N position. will return automatically to the 6. To return the direction of travel of the machin e so that it travels in a straight l from the N articulated to ine, operate the joystick in the opposite direction position (for example, when the machine is o the left). the right, operate the joystick t