. OPERATION EXPLANATION OF COMPONENTS MAINTENANCE CAUTION LAMP CAUTION 3 - 21 ENGINE OIL LEVEL This lamp (2) lights u p to warn the operator that the oil le vel in the engine oil pan has g During checks befor e starting (when the starting switch is turn ed to the ON position but t he engine is not started), thi s monito r light s up if the oil level in the engine oil pan is low. r display displays At the same time, t he top line of the characte "E01" and the botto m line displays "COOLANT LOW", so do not start the engine. Ch eck the oil level in the engin e oil pa n and add oil.
REMARK During checks befor e starting, if the engine is st arted wit h the engin e oil l evel caution lamp l ighted up, the lam p will stay lighted up. ck the oil level in the engine oil pan, and add oil. Stop the engine, che ck the oil level in the engin e oil pan , and add oil. BATTERY ELECTROLYTE LEVEL CAUTION LAM This lamp (3) is not used. If the caution lamp ligh ts up, repair the problem as so on as possible. If thi s is left as it is, it will lead to failure When the time for o il change is reached, this la mp (4) f lashe s or lights up for approx. 30 seconds after complet ion of the system ition.
tem check when the star ting switch is at the ON pos REMARK The maintenance ca ution lamp flashes when there are less than than 30 hours to the repla cement time, and after the replacement time has passed, it stays on. For details of the ite ms covered by filter and oil r eplacement, see "FILTER, OIL REPLACEMENT TIME DIS PLAY (PAGE 3-12)". After replacing the fil ter or changing the oil, reset time for the re placement. For details, see " RESET METHOD FOR FILTER, OIL REPLA CEMENT TIME (PAGE 3- 33)".