Komatsu — STARTING ENGINE

OPERATION OPERATION 2. Hold the key in starting switch (2) at the HEAT position, and check that preheating monitor (3) lights up. After about 30 seconds, preheating monitor (3) will flash for about 10 seconds to indicate that preheating is fin- ished. REMARK The monitor and gauge also light up when the key is at the HEAT position, but this does not indicate any abnormality. 3. When preheating monitor (3) goes out, turn the key in starting switch (2) to the START position to start the engine. 4. When the engine starts, release the key in starting switch(2). The key will return automatically to the ON position. 3-49